PTFE hollow fiber membrane-Nanjing CAS-BIDUN NEWMEM TECHNOLOGY CO.,LTD

Core products

Contact Us

电话：025-58218016
1）水处理技术咨询：
        章洪涛 133 3007 8874
2）商务咨询：
        陈东 152 5175 1214
3）膜产品信息咨询：
       杜炼 139 0136 8072
        邮箱：du.lian@yahoo.com

PTFE hollow fiber membrane

Core products >> PTFE hollow fiber membrane >>

PTFE hollow fiber membrane

字号：大　中　小

Product introduction: PTFE hollow fiber membrane is made of polytetrafluoroethylene as the material, which has the advantages of high strength, corrosion resistance, pollution resistance, good oxidation resistance, high COD resistance and high surface smoothnessThe membrane pore size is uniform and the flux is large, and the production of membranes with different parameter characteristics can be applied to a variety of industries. PTFE hollow fiber membrane products are divided into PTFE deamination membrane (high ammonia nitrogen wastewater treatment and other fields), ultra-micro filtration membrane (high suspended solids wastewater filtration and other fields), Membrane distillation (used in high-salt wastewater concentration, zero wastewater discharge and other fields), natural gas purification membrane (used for CO2 removal, desulfurization, deodorization and other fields).

Features:

High mechanical strength, long-term use of continuous filament, long life

Strong hydrophobicity, low surface energy, anti-oxidation, not easy to pollute

Stable performance, acid and alkali resistance, corrosion resistance, wide range of application

Membrane filament parameters:

specification	Inner/outer diameter mm	Average pore size μm	Fields of application
Thick wire (air film)	0.8/1.6	0.10	Membrane distillation, desalination, acid and base concentration, zero discharge, etc
Filament (air/water)	0.5/1.0	0.10	High ammonia nitrogen wastewater treatment, high suspended solids wastewater filtration, etc
Ultrafine filament (air film)	0.4/0.8	0.10	natural gas purification, etc

Previous：Ultra-microfiltration membrane modules Next：It's the last one！